DIY basement waterproofing can save you a lot of money in the end. A lot of home owners are unsure about using their basement because they are afraid that whatever is in it will get damage due to the basement flooding or molds and mildew. These problems are caused by water seeping in the concrete walls of your basement. A major problem that can be caused by this is a weaker foundation that might lead to deadly consequences.
Today, there are so many products that can be used for DIY basement waterproofing projects. Check out your local hardware to get one that you like best and then you can begin with your project.
Step 1: Look for cracks and holes in the walls of the basement.
Cracks and holes are the most common cause for water to seep in the basement. Should you find any, close them with quick-dry cement. Certain products are also available to patch up cracks and holes just make sure that they are ideal for basement walls. If water is trapped against your wall from the outside, you will need to insert a weep pipe to let it escape.
Step 2: Apply a water proof coating on the walls
Make sure that all patched up holes are dry. Your waterproof coating should not be too thin that water or moisture is still able to pass through. Be sure to you follow the instructions indicated on the water proofing product that you are going to use.
Sometimes leaks may be caused by crack or holes found where your floor and wall meet. Just the same you will need to seal them and then apply a water proof coating. With these easy DIY basement waterproofing steps, you can now enjoy a dry basement.
Considering basement waterproofing? Discover practical basement remodeling ideas online and turn cheap basement ideas into dream basements at a budget.
Lowest Construction Bids
No comments:
Post a Comment